- Ideal where a number of hot water outlets are needed, such as kitchens, washrooms, schools restaurants, or offices.
- ‘Twin stat’ temperature control for excellent safety, allowing the first thermostat to be set to the required
temperature and the second to be set to a cut-out temperature 15.C above the first. Second ‘safety’ thermostat is also manually re-settable.
- Polyurethane foam injected insulation for minimal heat loss.
- Built-in feed cisterns for easy installation. Minimum height of the hot water draw-off point is 1.25m
below the top edge of the unit.
- Steel case for durability.
- Pre-drilled cistern inlets for left or right-hand supply.
- Bylaw 30 compliant.
RATING Kw 3
CAPACITY litres 25
WEIGHT EMPTY/FULL Kg 15/45
ELEMENT: Copper on heater plate assembly
INNER CONTAINER: All copper construction/WRC approved GRP cistern.
CASING: Anti-corrosion proofed powder coated steel.
INSULATION: Injected polyurethane foam.
THERMOSTAT: Variable thermostat with variable manual reset thermostat.
BASINS 2/3
SINKS/COMMERCIAL 0
STORED TEMPERATURE: 71°C (24 hour supply)
Warranty: 2 years . Important Note: Type of use can vary capacity required – please consult HSD if in doubt.
Delivery time : Next Working Day if ordered before 12 noon. Need to arrange a specific delivery date? Call us to arrange
Warranty : 2 years on site manufacturer's warranty
Dimensions : h 880 w 452 d 215 mm
Please read all product information and supplied instructions carefully and use the product in accordance with them. Failure to do so may reduce the effectiveness of the product and may invalidate any warranty.
All content Copyright © Hygiene Supplies Direct Limited, 2003-2008
when ordered before 12 noon.
Arrived next day. It works fine 
