P4/52 5L 2kW Tudor Over-sink Point Of Use

P4/52 5L Tudor 2kW, Over-sink Water Heater with Spout
Capacity: 5 ltr
Rating: 2kW
Dimensions mm: 390H x 255W x 215D
Heating element: Embedded rod type
Thermostat: Capillary type, adjustable 35°C to 80°C
Water tank: Approved polypropylene tested to 2.75 bar
Case: Impact resistant plastic
Insulation: High density, CFC-free, polyurethane foam
Approvals: WRAS approved and CE endorsed
Warranty: One-year
Simple to operate
Temperature controlled water whenever you want it Externally adjustable temperature control
Neon light indicates when the heating element is ‘ON’
Safety features: Open-outlet non-pressurised system
Frost protection setting protects heater when not in use
Manually re-settable over temperature safety cut-out Installation: Supplies hot water to a single outlet using approved vented taps. Connects directly to the cold water supply. No need for expansion vessel or relief valve
Plumbing: Can be connected to a rising main or to a cistern with a minimum working head of 5 metres
All water connections are via 15 mm compression fittings
Over-sink models are supplied with a 300 mm open outlet spout and water control valve
Under-sink models must be installed only with a Zip approved open-outlet tap
Over-sink and under-sink models are NOT interchangeable
Electrical: To be wired to a double pole fused spur, minimum break rating of 13 amps. Mains cable fitted
Installation must comply with current IEE regulations
Caution: Variable temperature water heaters should be set only in
strict compliance with regulations governing the temperature of stored and dispensed hot water

Please read all product information and supplied instructions carefully and use the product in accordance with them. Failure to do so may reduce the effectiveness of the product and may invalidate any warranty.

See more customer experience reviews