Frequently bought together
Zip Aquapoint III
Unvented, Under-sink Water Heater - 15 litre - 2KW
Features and benefits
Inner container comprised of glass lined steel, tested to 12 bar.
Sacrificial anode provides protection against corrosion.
Neon indicator shows when element 'ON'.
Frost protection setting built into external temperature controls.
Embedded rod type heating element.
2kW @ 230V.
Capillary type thermostat adjustable between 7° - 75°
1.8mm Glass enamelled steel, tested to a pressure of 12 bar.
CFC-free high density, polyurethane foam.
Water proofed to IP24
Manually resettable over temperature safety cutout.
Expansion relief Valve set at 6 bar (supplied).
Added protection for element and tank using a sacrificial anode, requiring regular inspection and replacement when necessary.
High impact resistant plastic casing.
All models can be wall mounted.
Under sink model.
15 Litre Aquapoint II suitable for supply to one to three outlets.
1/2" BSP water connections. Expansion relief valve set at 6 bar (supplied).
Should only be installed by a person experienced in the installation of unvented electric storage water heaters.
To be wired to a double pole switched fused spur with a minimum break capacity of 13amps. Installation must comply with current IEE regulations.
Supplied with 1 metre of pre-wired cable.
WRAS, CEE endorsed.
One year on site parts and labour warranty
HSDonline stock spare parts for all current ZIP products.
Documents & Instructions
Frequently asked questions
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.