Features and benefits

• Long-life incoloy sheathed rod type heating element
• Dry Start protection.
• Twin chamber stainless steel boiling chamber, Crevice free stainless steel with access ports in the top and bottom.
• Capillary type thermostat.

Insulation
Insulated with high efficiency aluminium backed mineral wool .

Case
White enamelled steel.

Tap
Classic catering style tap, chrome plated classic catering style.

Approvals
WRAS, CE endorsed

Warranty
Two-year on site warranty, parts and labour.

Installation
To be installed over a draining board, or work top (drip tray required on work top) Tap spout should be installed no higher than required to fill large pots. Tap must be installed at a minimum height of 200mm above a draining board.

Plumbing
Designed to be installed to a potable (drinkable) water supply with a minimum pressure of 0.7 bar. If pressure exceeds 7 bar a pressure limiting valve will be required. An isolating valve should be installed between the mains supply and the system.

Concealed plumbing
Connect inlet and vent pipes from the rear via 15mm capillary elbows.

Exposed plumbing
Connect inlet and vent pipes from below directly to 15mm compression fittings.

Venting
Using a tundish the vent must discharge to a safe and visible position.

Electrical
Unit should be wired to a double pole fused spur, minimum break capacity of 13 amps required. Installation must comply wit current IEE regulations.