Customers also bought
You may also like
Our products stand out from the crowd, in the design and choice of materials, in their noise and performance characteristics and product attributes - and in the functional benefits that come from our constant efforts to unite us with our customers expectations.
Whether your requirement is the supply of product ready for installation into a variety of air movement applications, such as building services and the agricultural sectors, or as an OEM, to integrate Hydor product into your own – The HP & HG range of plate and basket guard mounted type axial fans are designed to meet your requirements.
A tough epoxy paint finish ensures adequate protection against corrosion.
These are protected to IP54 which means they are highly resistant to dust and water ingress.
Very efficient for moving high volumes of air at relatively low pressures.
The motor mounting brackets are constructed in the form of a welded wire framework which acts as a finger guard.
The mounting brackets are electroplated prior to black epoxy powder coating to provide protection.
Motors have sealed for life bearings.
Sickle blade profile impeller.
• 8 standard sizes from 250mm to 630mm.
• Two, four, and six pole motors available.
• Air volume flow rates of up to 3.0 m3/sec.
• Static pressures of up to 200 Pa.
• Wide operating range.
• Thermal overload protection.
• Bell mouth inlet for smoother airflow.
• Suitable for operating temperatures of up to +55° C
• Sealed for life ball bearings to operate at any angle.
• Motors protected to IP54 with Class F insulation.
• Fully speed controllable.
• Operating up to 95% humidity.
• Condensation drain holes.
• All available from stock.
Hydor fans have condensation drainage holes built into the motors as standard which are designed to preclude the build up of condensation within the motor, either when it is operating in predominantly humid surroundings or considerable changes in temperature.
The HP / HG axial fans are suitable for mounting in any position which enables greater flexibility for site installations.
All Hydor HP / HG units have integral thermal overload protection which prevents the motor from overheating.
Ease of installation
Fans are supplied with an integral IP54 terminal box and motor side guard, which allows the fan to be positioned conveniently to incoming electrical inputs.
HG fans are suited to a wide variety of applications, particularly with original equipment products from air heaters, heat pumps, condensers, cooling units and evaporators.
HP fans are suited to a wide variety of discharge and supply applications in the building services sector such as warehousing, restaurants, sports halls, industrial units, schools and kitchen extract to agricultural markets.
*HPA fans are not suitable for spray booths*
How much extraction do I need?
First enter the size of your room in metres
And then select your room type
Your extractor fan will need to move between 0m³ and 0m³ per hour
Documents & Instructions
Frequently asked questions
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.