Trustpilot
You may also like
Product information
Specifications
Brand:
Crown
Combined Mounting Bracket
For fast, simple assembly of safety valve, expansion
vessel and check valve for undersink and oversink units.
Stainless steel bracket, pipework and fittings
2L expansion vessel
15mm/1/2” single check valve
(Supersedes kits A, C and D)
Please note: this Kit GA is only suitable for the Undersink Crown Water Heater models and is not compatible with the Oversink models.
Reviews
Powered by
WH, Norfolk
OK. On time and as expected.
27 Aug 2013
Valerie, Surrey
Delivery within 24 hrs. Product working well and suitable for my needs
23 Feb 2013
John, Leicester
Product as described.
30 Jan 2013
Alan Electrican Norfolk
very pleased with water heater could not be more pleased with how it performs,easy to install and serves 1 sink + 1 basin saves water and electic.
12 Dec 2011
Frequently asked questions
Hi, so with this kit can a cold water tap be as close to the unit as possible? As its an undercounter heater, the nearest cold tap is directly above it, so presumably this is pretty much always required unless you have a individual supply for the heater
The expansion kit and bracket is required if the heater is less than three metres away from the stop tap on your cold water feed. As water is heated it needs room to expand. If there is not enough room to expand this could stop the unit from working, and the built up pressure could damage the water heater.
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.
| Email: | |
| Phone: | |
| Question: | |
