You may also like
30Litre HiStore Unvented Water Heater
Each unit is 3kw so can easily be connected the ring main circuit. Units are also wall mounted (space saving). The unit stores water at mains pressure, so no noisy pumps.
The unit has a stainless steel immersion heater and a massive sacrificial anode that is designed preserve the water heater. To check the condition of the anode has always meant draining down UNTILL NOW!!. The anode test button sends a minute electrical charge through the anode. The indicator then tells you when the anode needs changing, usually after at least two or three years. This means that annual checks can take just a few minutes.
Each heater comes with a factory fitted temperature and pressure relief valve, Expansion vessel, Safety Valve, Pressure Reducing Valve Complete With Gauge and Tundish.
The unit is supplied complete with all the necessary safety equipment to comply with legislation governing the
installation of such systems:
* Anode Test Button and Gauge
* Expansion Vessel
* Adjustable Pressure Reducing Valve preset to 3Bar with inbuilt filter,
Non Return Valve, 6 Bar Expansion Relief Valve, Tundish, Braided Hose
* T & P Valve 7 Bar 90°C Factory Fitted
* 15mm to 22mm Tundish
* Cylinder with 3kW Stainless Steel Immersion Heater, Thermostat and
Manual Reset Thermal Cut-Out
* In-Built Wall Hanging Bracket
Depth: 400mm Width: 400mm Height: 665mm
Weight when full: 47kg
Heat up time (15°C to 65°C): 36Min's
Frequently asked questions
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.