Xterminate 2 x 8 Watt 12 Inch Replacement Fly Killer Bulbs T5 - 365nm
Customers also bought
You may also like
- This 8 watt 12 inch fly killer tube fits into the majority of 16 watt electric fly killers including the Xterminate XZAP 16
- With a high UV output of 365+5nm and a bulb lifetime of 6000 hours, this bulb helps attract flies into the killing grid of your electric fly killer
Frequently asked questions
Please see the link below to the 8w 12" shatterproof bulb
Remove the catchment tray and carefully lay the unit face down on a flat surface so the power cable shows from the rear.
Remove the two screws and mesh securing washers from the top rear of the mesh.
Remove the bottom two screws from the black plastic side furthest away from the power cable. Important only remove the bottom screws leave the top two in position.
Remove the rear mesh which will expose the two bulbs.
Carefully twist the bulbs one at a time so that the prongs on each face upwards and remove them.
Carefully insert the new bulbs and twist into position.
Carefully place the rear mesh back into position ensuring the top section of the mesh is pushed under the top section of the unit.
Insert the two screws and mesh securing washers into place.
Insert the two screws into position on the bottom section of the black plastic side.
Insert the catchment tray and the unit is ready to use.
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.