Pro-Kleen Karcher K Series Snow Foam Lance Starter Kit
You may also like
Pro-Kleen Karcher K series Compatible Snow Foam Lance
Our extensively tested Lance is designed and manufactured to the highest standards, to help ensure you can get the most out of your purchase. Designed to be compatible with the Karcher K series of pressure washers, fitting models K2, K3, K4, K5, K6 and K7. It also comes with a 1L capacity so you can mix your solution exactly as you like it in order to to get the perfect thickness.
The two nozzles located on the lance allow you to tweak your settings to get the perfect mixture for you. The Nozzle located on top will allow you to adjust the air intake and alter the pressure to allow for different consistencies, while the spray nozzle allows you to adjust the spray pattern from a direct flow to a wide fan.
It boasts some impressive power too. With a max pressure of 2900 PSI and a Max Bar of 160, it can allow for a capacity of up to 20L per minute and a maximum operating temperature of 60°. So, you can get through anyway wash, whether your car is big or small or you are planning to use your lance for domestic or even professional use, the Pro-Kleen lance has got you covered and can handle any job in no time at all.
Pro-Kleen pH neutral snow foam
This starter kit comes with our best-selling Pro-Kleen Snow Foam available in a wide range of refreshingly fruity fragrances from classic cherry to our playful pink coloured Strawberry Milkshake fragrance! They are all pH Neutral so despite packing a punch they won’t damage paintwork or any other part of your vehicle.
The ultimate pre-wash
So, if you are wondering what exactly Snow Foam is and what it does, then let us explain. It is a pre-wash product designed to be used before the contact wash part of your cleaning routine. It produces a thick foam that clings to your car and as it clings it gets to work breaking down and loosening tough dirt, grease and grime. After leaving to work for a few minutes you rinse your car and follow up with your normal shampoo. This step now becomes much easier as the dirt will easily slide away, it also helps to protect your paintwork from scratching and streaking and with the high volume of wax in our formula, it will give your car an unbeatable shine too!
How to use
Since any number of factors can affect the consistency of your snow foam, from ambient temperature, water pressure, whether water is hard or soft and many more there is no one size fits all, so some experimentation may be needed.
- A good starting place is to mix the solution with warm water at a ratio of 3:1, we find this usually produces the best results, however, you can add more or less product to find the ideal thickness for you if this isn’t quite right.
- Apply a generous layer with your lance and pressure washer and leave to dwell on your car for 5 minutes
- Rinse with clean water and then finish off with your normal shampoo
Please be advised that we do not recommend applying snow foam in hot temperatures as it will slide off your without having time to effectively work.
Documents & Instructions
Frequently asked questions
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.