Supawash Pro pH Neutral Snow Foam with Free Microfibre Cloth and Mitt
You may also like
Superior Car Detailing
This super-thick snow foam is a must-have for any car detailer. Whether you’re an experienced pro or you just like to keep your car looking its best Supawash Pro snow foam offers professional-quality cleaning for an affordable price. It’s a powerful cleaning formula that you can use as a quick main wash, or as a pre-wash before your car shampoo.
Thick, Satisfying Foam
Supawash Pro produces a satisfyingly thick foam that clings to your car, increasing contact time between the cleaning agents in the foam and the dirt on your paintwork. As the bubbles in the foam burst, the foam drips off your car, pulling the dirt along with it. Not only does this make your car cleaning routine a little more fun, it also gives your car a deeper clean.
pH Neutral Formula
Despite its incredible cleaning power, Supawash Pro is a pH neutral formula. This means you can safely use it on any part of any vehicle, even if it has sensitive paintwork, lacquered wheels, or glass.
Amazing Dilution Ratio
You can dilute this snow foam at a rate of up to three parts water to one part foam liquid (1:3). Each bottle goes a long way!
2 Fragrances to Choose From
Choose between two fruity fragrances – apple or orange – and put the fun back into detailing!
Includes Free Microfibre Cloth and Wash Mitt
Each purchase comes with a premium 1000GSM microfibre cloth and a microfibre wash mitt that you can use for cleaning, detailing, and valeting your car. Both the cloth and the mitt are designed to be super-soft and absorbent, so they’ll pick up dirt from your paintwork and trim without leaving scratches and swirls.
How to Use
For best results, spray onto a dry car on a clear day.
- Mix your snow foam as required (see Recommended Ratio below) in your snow foam lance bottle.
- Affix the lance to a pressure washer. If required, adjust the spray pattern and air intake of your lance to get the right consistency of foam.
- Spray the foam onto your car, working from bottom to top.
- Leave to work for 10-15 minutes.
- Rinse off with clean water, working from top to bottom this time.
- Follow up with a shampoo and wax treatment if required.
We recommend you start by mixing your snow foam using one part water with three parts liquid (1:3). However, snow foam thickness can be affected by many things, including water hardness or impurities, water pressure, and other factors, so you can also try mixing a 1:2 or even a 1:1 solution to get thicker foam if necessary.
Frequently asked questions
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.